SURPLUS TOWERS

Telecom Surplus is the region's most trusted resource when it comes to providing surplus towers, used towers, or possibly even new telecommunication towers. This is including self-supporting and guyed towers, or tapered steel monopoles... and also stealth structures. Other products you will find access to are antenna mounts and accessories, outside (concrete) shelters, cabinets and other related surplus telecommunication equipment items. Located in Colorado, Telecom Surplus is eager for the chance to provide you with product or information that you need.

What exactlyl are Surplus Towers. Surplus towers are structures that are essentially new and typically have never been installed. Used towers, on the other hand, are structures that have been installed at one time or another and that are now dismantled and ready to be reassembled and put to use again. New towers, it probably goes without saying, include excess inventory from various manufacturer that are previously un-used.

What does it mean that we provide you with surplus equipment? Well, essentially, this means that you are guaranteed some savings when you purchase towers from Telecom Surplus Resources. And more importantly, with Telecom Surplus Resources, customer satisfaction is always guaranteed.

When buying from excess inventories you are insuring yourself that you are indeed getting the best possible price for your solution. To put this into a perspective that is easy to translate to your bookkeeper, our customers enjoy an average of about a 50% to 60% savings when opting for surplus over new towers.

TYPES OF SURPLUS TOWERS

Types of communication towers

The different types of communication towers are based upon their structural action, their cross-section, the type of sections used and on the placement of tower.

3 Classifications

Towers can be classified into 3 basic groups. Their classifications are based on structural data. The Classifications are:

• Self supporting towers
• Guyed towers
• Monopole

Self supporting towers

Towers that are supported on the ground or on a structure such as a building are known as self-supporting towers. The weight of these towers is more, but they require less base area and so can be suitable for many situations. Most TV, MW, Power transmission and flood light towers that you see will be self-supporting towers.

Guyed towers

Guyed towers provide height at a much lower material cost than self-supporting towers due to the efficient use of high-strength steel in the guys.

Guyed towers are normally guyed in three directions over an anchor radius of typically 2/3 of the tower height and have a triangular lattice section for the central mast. Tubular masts are also used, especially where icing is very heavy and lattice sections would ice up fully. These towers are much lighter than self-supporting type but require a large free space to anchor guy wires. Whenever large open space is available, guyed towers can be provided. There are other restrictions to mount dish antennae on these towers and require large anchor blocks to hold the ropes.

Monopole

It is single self-supporting pole, and is generally placed over roofs of high raised buildings, when number of antennae required is less or height of tower required is less than 9m.

Based on cross section of tower

Towers, or SURPLUS TOWERS, can be classified, based on their cross section, into square, rectangular, triangular, delta, hexagonal and polygonal towers. Open steel lattice towers make the most efficient use of material and enables the construction of extremely light-weight and stiff structures by offering less exposed area to wind loads. telecommunication and broadcasting towers are lattice towers.

Most of the power transmission, Triangular Lattice Towers, and the same goes for SURPLUS TOWERS, have less weight but offer less stiffness in torsion. With the increase in number of faces, it is observed that weight of tower increases. The increase is 10% and 20% for square and hexagonal cross sections respectively. If the supporting action of adjacent beams is considered, the expenditure incurred for hexagonal towers is somewhat less.

Based on the type of material sections

Based on the sections used for fabrication, towers are classified into angular and hybrid towers (with tubular and angle bracings). Lattice towers are usually made of bolted angles. Tubular legs and bracings can be economic, especially when the stresses are low enough to allow relatively simple connections. Towers with tubular members may be less than half the weight of angle towers because of the reduced wind load on circular sections. However the extra cost of the tube and the more complicated connection details can exceed the saving of steel weight and foundations.

Go here to see our current selection of SURPLUS TOWERS.  

SURPLUS TOWER, SURPLUS TOWERS, COMMUNICATION TOWER